Téléphone (s):403.346.5238 Fax:403.341.4910 | 175 Leva Ave Red Deer County Alberta T4E 0A5 |
Honda VersAttach™ Powerhead – 35cc UMC435LAC1 | |||||||||||||||||||||||||||||||||||||||||
    | |||||||||||||||||||||||||||||||||||||||||
Caractéristiques
| |||||||||||||||||||||||||||||||||||||||||
Description
| |||||||||||||||||||||||||||||||||||||||||
MOTEUR | |||||||||||||||||||||||||||||||||||||||||
Carburetor Diaphragm type w/fuel pump Idle_Speed 3,100 ± 200 RPM Spark_Plug CMR5H (NGK) Air_Cleaner Semi-dry type Clutch_Size 78 mm (3.0625 in.) Diameter Engine_Type Honda GX35, mini 4-stroke, OHC, single cylinder, air-cooled, multi-position (360°) Displacement 35.8 cc (2.18 CID) Oil_Capacity 100 cc (3.52 fl. Imp. oz.) Bore_&_Stroke 39 x 30 mm (1.5 x 1.2 in.) Fuel_Capacity 0.63 L (22.2 fl. Imp. oz.) Cooling_System Forced air Ignition_System Transistorized magneto ignition (electronic) Recommended_Oil SAE 10W30 API service classification SJ or later Starting_System Recoil starter Stopping_System Ignition primary circuit ground Max._No-Load_RPM 10,000 RPM Recommended_Fuel Regular unleaded gasoline (86 Octane or higher) Clutch_Engagement 4;200 ± 200 RPM Honda_Engine_Model GX35T Lubrication_System Oil mist Maximum_Net_Torque 1.6 N.m (1.20 lbf-ft.) @ 5,500 RPM | |||||||||||||||||||||||||||||||||||||||||
CARACTéRISTIQUES | |||||||||||||||||||||||||||||||||||||||||
Low_engine_noise_and_minimal_vibration Offers_full_360º_inclinable_operation Compact_and_lightweight_ergonomic_design Fuel_efficient,_user-friendly_and_easy_to_start Safe_and_secure_SureLocTM_System_-_easy_to_connect Wide_variety_of_multi-purpose_attachments_available Powered_by_35_cc_Honda_GX35_OHC_Mini_4-stroke_engine | |||||||||||||||||||||||||||||||||||||||||
DIMENSIONS DU PRODUIT | |||||||||||||||||||||||||||||||||||||||||
Overall_Width 32.0 cm (12.6 in.) Overall_Height 25.5 cm (10.0 in.) Dry_Weight_(without_attachment) 6.0 kg (13.2 lbs.) Overall_Length_(without_attachment) 114.5 cm (45.1 in.) | |||||||||||||||||||||||||||||||||||||||||
INFORMATIONS COMPLéMENTAIRES | |||||||||||||||||||||||||||||||||||||||||
Handle_Type Loop Shaft_Support Rubber Mounted Bushings (4) Drive_Shaft_Type Rigid Steel Shoulder_Harness Standard Blade_Barrier_Kit Standard Engine_Stop_Switch Slide type switch Main_Pipe_Diameter 26 mm (1.02 in.) Throttle_Control_Type Two-motion trigger type Safety_Goggles_(A.N.S.I_Std.) Standard Main_Pipe_Thickness_/_Material 2 mm (0.08 in.) Aluminum | |||||||||||||||||||||||||||||||||||||||||